Marquis Spas Improper or Unsafe Electrical Protection

GFCI test button does not trip the breaker or spa does not have a GFCI-protected disconnect.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective GFCI breaker, Incorrect wiring by installer, Use of standard breaker instead of GFCI, Corroded breaker contacts

Critical safety issue: Electrical work must comply with local codes and should be performed by a licensed electrician.

Do not use spa: If the GFCI does not trip when tested, discontinue spa use until corrected.
Have wiring inspected: Contact a qualified electrician familiar with Marquis spa requirements to verify that the spa is on a properly sized GFCI breaker and wired per the installation manual.
Replace faulty breaker: If the GFCI fails its self-test, it must be replaced.

Professional Required 5/5

GFCI Breaker (Spa Supply Circuit)

Check Price on Amazon

We may earn a commission from links on this page.