Pump runs but no water comes out of jets after draining and refilling spa

Safety first: Turn off power before loosening any unions or fittings.

• Verify water level: Ensure the spa is filled above all skimmer openings.
• Open slice valves: Confirm all slice valves around the pumps and heater are fully open.
• Bleed air from pump: Loosen the union on the pump discharge or suction side until air escapes and water begins to seep out, then retighten.
• Prime via hose: Insert a garden hose into the filter compartment and force water down into the suction line to help push air out.
• Restart pump: Turn power back on and run the pump. Repeat bleeding if necessary until strong flow returns.