Michael Phelps Spas
LED Lighting String or Driver Failure
Spa lights flicker or some LEDs are out in the Michael Phelps Spas lighting system
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed individual LED modules, Loose daisy-chain connectors, Faulty low-voltage light driver on control pack, Water intrusion into light housings
How to Fix / Troubleshooting
Safety: Turn OFF power at the breaker.
- Inspect main light and accent lights: Look for water inside lenses or obvious damage.
- Check connectors: From the equipment bay, follow the low-voltage lighting harness and ensure all plug connections are tight.
- Isolate bad module: If one section of LEDs is out, that module or its connector may be faulty. Replace the affected LED module with an OEM-compatible part.
- Check light driver: If all lights are out and fuses are good, the low-voltage light driver on the control pack may have failed and the pack may need repair or replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
LED Light Modules or Light Driver Circuit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements