Water is leaking from the bottom of the inflatable MSPA tub body, not from hoses or motor unit.

Safety first: Disconnect power and drain the spa before attempting repairs.

• Locate puncture: Inflate the tub and spray soapy water on suspected areas. Bubbles will form at the leak point.
• Mark and dry: Mark the leak with a waterproof marker and dry the area thoroughly.
• Apply patch: Use an MSPA PVC repair patch kit. Cut a rounded patch larger than the hole, apply the supplied adhesive, and press firmly over the leak. Allow the recommended curing time before refilling.
• Check seams: If the leak is along a seam or is large, a patch may be temporary. Consider replacing the MSPA tub liner if damage is extensive.