NetSpa Display Module Degradation

NetSpa display is very dim, flickering, or segments are missing, but the spa still operates.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LCD/LED display, Moisture behind display window, Loose display connector, Low internal supply voltage

Safety first: Unplug the spa before inspecting the control panel.

Shade the panel: Strong sunlight can make displays appear dim; test in shade to confirm.
Power reset: Disconnect power for 10 minutes and reconnect to clear minor glitches.
Check for condensation: Look for fogging or moisture under the display window; allow the panel to dry out naturally if present.

If the display remains dim or partially missing, the NetSpa control panel/display assembly is likely failing and should be replaced.

Medium 3/5

NetSpa control panel display module

Check Price on Amazon

We may earn a commission from links on this page.