One or more jets do not flow at all while others work normally.

Safety: Turn off power before removing jets.

• Check jet adjustment: Many Saratoga jets turn clockwise to close and counterclockwise to open. Rotate the non-working jet fully open.
• Remove and inspect jet: Twist and pull the jet internal out. Remove any debris and rinse thoroughly.
• Inspect jet body: Shine a flashlight into the jet body to look for obstructions. Use a flexible wire carefully if needed.
• Bleed air: Run the pump with all jets open and cycle the air controls to purge air from the lines.

Replace any broken jet internals with Saratoga-compatible replacements.