Saratoga Spas No Power / Dead Spa

Spa will not power on at all, no lights on control panel, no pump activity.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Tripped GFCI breaker, Blown main fuse on Saratoga control pack, Loose power connections in equipment bay, Failed control pack power supply

How to Fix / Troubleshooting

Safety: Only qualified persons should open electrical panels. Always turn off the main breaker before tightening connections.

  • Check GFCI: Locate the spa's GFCI breaker or outlet. Reset it by switching fully OFF then ON. If it trips immediately, there is a fault that needs diagnosis.
  • Verify house breaker: Confirm the spa's dedicated breaker in the main panel is ON.
  • Inspect control pack fuses: With power OFF, open the equipment bay and remove the control pack cover. Look for glass or blade fuses and check for continuity with a multimeter. Replace only with the same rating.
  • Check incoming power: A licensed electrician or spa technician should verify correct voltage at the control pack terminals.

If fuses blow repeatedly or there is no low-voltage output from the control pack, the control board may need replacement.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Spa Control Pack
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements