Water is leaking from around the light lens or in the footwell area
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off power at the GFCI breaker. Do not operate the spa with water leaking near electrical light components.
Steps to address light leaks:
- Confirm leak source: Observe water seeping from the light area with the spa partially drained and refilled.
- Access back of light: Remove side panels or insulation to reach the rear of the light housing.
- Tighten or reseal: Tighten the retaining nut if present. If the gasket is deteriorated, replace the lens gasket or the entire light assembly with a Strong Spas-compatible LED light kit.
When to call a technician: If the light housing or shell around it is cracked, professional repair is required.
Repair Difficulty
Required Part
We may earn a commission from links on this page.