Jets are weak or some seats have very low water pressure

Safety first: Turn off power before removing filters or jets.

• Clean filters: Remove and thoroughly clean Sunrise Spas filter cartridges. Run the spa briefly without filters to test flow.
• Check diverter valves: Rotate any top-side diverter valves fully in both directions to ensure they are not restricting flow to certain seats.
• Bleed pump: Loosen the union on the jet pump to release trapped air, then retighten.
• Clean jets: Remove individual jet inserts (if removable) and rinse out debris. Soak in a descaling solution if mineral buildup is present.