Villeroy & Boch No Power / Dead Spa

Spa will not power on at all, no lights or display on Villeroy & Boch control panel

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Tripped house breaker feeding Villeroy & Boch spa, Tripped GFCI in spa supply, Loose main power connections in control pack, Failed main fuse on Villeroy & Boch control board

How to Fix / Troubleshooting

Safety: Power circuits to spas are high voltage. If you are not comfortable working with electricity, contact a licensed electrician or spa technician.

  • Check breakers: Locate the dedicated spa breaker in your main panel and any external GFCI disconnect. Reset if tripped.
  • Inspect GFCI test/reset: If your Villeroy & Boch spa is fed through a GFCI, press RESET and see if power is restored.
  • Verify control pack power: With power off, open the equipment bay and check that the main power wires are securely attached to the Villeroy & Boch control pack terminals.
  • Check internal fuses: Many Villeroy & Boch control boards have one or more fuses. With power off, inspect and replace any blown fuses with identical ratings.

If fuses blow repeatedly or power cannot be restored, a professional should test the control pack and wiring.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control Pack Fuse
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements