Dehumidifier shows P1 and stops, water tank may be full

Safety: Unplug the unit before handling water.

• Empty tank: Remove and empty the water tank. Clean it to remove any slime or debris.
• Check float and switch: Verify that the float moves freely and that the float switch operates correctly (see E7 entry).
• Inspect continuous drain: If using a hose, ensure the drain hose is not kinked or blocked and that it slopes downward continuously to the drain.
• Reset: Reinstall the tank securely and power the unit. If P1 persists with an empty tank and working float, replace the water level float switch.