Aprilaire
Loss of Dehumidification Capacity
Aprilaire dehumidifier runs but does not remove moisture (air feels unchanged, bucket or drain is dry)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Refrigerant leak or low charge, Severely dirty evaporator coil, Failed compressor, Stuck expansion device, Fan running but compressor not starting
How to Fix / Troubleshooting
Safety first: Disconnect power before opening the cabinet. Refrigerant work must be done by a licensed technician.
- Check for condensate: Inspect the drain line or pan while the unit runs. If there is no water after several hours of operation in humid conditions, dehumidification is not occurring.
- Listen for compressor: With the unit running, listen for the compressor hum and slight vibration. If only the fan runs, the compressor may be failed or not receiving power.
- Inspect coils: Remove panels and check both evaporator and condenser coils for heavy dirt. Clean with coil cleaner and a soft brush.
- Look for frost: Ice on the evaporator indicates a possible airflow or refrigerant issue.
- Professional diagnosis: If coils are clean and the compressor still does not dehumidify, contact an HVAC technician to check compressor operation, capacitors, and refrigerant charge. The sealed system or Aprilaire compressor may need replacement.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Aprilaire Dehumidifier Compressor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements