Beko Keypad / Touch Control Failure

Dehumidifier display works but buttons do not respond or respond intermittently

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn membrane keypad, Moisture under touch panel, Loose control panel connector, Faulty control PCB

Safety: Unplug before removing the control panel.

Steps:

1. Dry the panel: If the unit is in a very humid area, condensation may affect the touch panel. Allow it to dry in a warm, dry room.
2. Reseat connectors: Remove the bezel and reseat the ribbon cable between the keypad and PCB.
3. Inspect for damage: Look for cracks or corrosion on the keypad PCB.
4. Replace keypad/control PCB: If buttons remain unresponsive, replace the Beko control panel PCB or keypad assembly.

Medium 3/5

Control Panel / Keypad PCB

Check Price on Amazon

We may earn a commission from links on this page.