Water tank fills too quickly or overflows despite continuous drain hose connected

Safety: Unplug the unit and empty the tank before working on the drain.

Steps:

• 1. Verify hose connection: Ensure the hose is connected to the correct continuous drain port, not just inserted into the tank.
• 2. Check hose routing: The entire length of the hose must slope downward from the unit to the drain. Remove any loops or upward sections.
• 3. Clear hose blockage: Disconnect the hose and flush it with water to remove debris.
• 4. Inspect internal spout: Check that the internal drain spout is properly aligned with the hose connector and not cracked.
• 5. Replace damaged fittings: If the drain adapter or spout is damaged, replace with the correct Beko drain adapter kit.