Crane dehumidifier displays EC and stops running; may restart briefly then show EC again.

Safety first: Unplug the unit before removing covers. Refrigerant handling must be done by a certified technician.

• 1. Clean coils and filter:
  • Remove and clean the air filter.
  • Vacuum dust from the evaporator and condenser coils.
• 2. Check ambient conditions:
  • Ensure the room temperature is within the operating range specified by Crane (typically above 41°F/5°C).
  • Very low room temperatures can trigger EC on some models.
• 3. Inspect for icing:
  • Look at the evaporator coil while running; heavy ice buildup can indicate airflow or refrigerant issues.
• 4. Sensor check:
  • Locate the low-pressure or evaporator temperature sensor and ensure it is properly clipped to the coil and wired.
• 5. Professional diagnosis:
  • If EC persists after cleaning and verifying sensors, the sealed system likely has a leak or restriction.
  • Contact a refrigeration technician for leak detection, evacuation, and recharge or coil replacement.