Essick Air
Fan Motor Failure
Humidifier lights up but fan does not run; no airflow from vents.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open fan motor winding, Seized fan bearings, Obstruction preventing fan rotation, Faulty fan speed control triac or relay on board
How to Fix / Troubleshooting
Safety first: Unplug the humidifier before accessing the fan.
- Check for obstructions: Remove the top cover and inspect the fan blades for debris or wick material. Clear any blockage.
- Spin test: Try turning the fan by hand. If it is stiff or does not spin freely, the motor bearings are likely worn out and the motor should be replaced.
- Inspect wiring: Ensure the fan motor connector is firmly attached to the control board and that wires are not burnt.
- Test on different speeds: If the fan runs only on some speeds, the speed control circuit on the board may be failing.
- Replace fan motor: If the motor is open or seized, remove mounting screws, disconnect the harness, and install a new Essick Air fan motor assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fan Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements