GE Appliances Short Cycling

Dehumidifier runs briefly then shuts off, repeatedly cycling on and off

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dirty coils causing high pressure, Failing compressor overload, Faulty humidity sensor causing rapid on/off, Overheating due to poor airflow

How to Fix / Troubleshooting

Safety: Unplug before cleaning or inspecting internal parts.

Steps to address short cycling:

  • Clean filter and coils: Ensure maximum airflow by cleaning the filter and both coils.
  • Check room temperature: Very low room temperature can cause rapid cycling; move to a warmer area.
  • Observe behavior: Note whether the compressor or entire unit shuts off. If only the compressor stops, the overload may be tripping.
  • Inspect compressor area: Ensure condenser coil is clean and fan is running properly to keep compressor cool.
  • Humidity sensor: If the unit turns off even though the room is still humid, the humidity sensor may be misreading and should be inspected or replaced.
  • Professional help: Persistent short cycling with a hot compressor may indicate a failing compressor or refrigerant issue; contact a technician.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Humidity Sensor / Compressor Overload
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements