Levoit Bucket Full Switch Fault

Dehumidifier shows bucket full or tank full indicator even when the bucket is empty and properly installed.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck float in full position, Misaligned bucket not engaging switch, Faulty bucket full microswitch or sensor, Broken float arm

Safety: Unplug before inspection.

Steps:

Reinstall bucket: Remove and firmly reinsert the bucket, ensuring it is fully seated and level.
Inspect float: Locate the float mechanism near the bucket area. Ensure it moves freely and is not jammed by debris.
Check switch: Access the bucket full microswitch and verify the actuator is pressed when the bucket is installed. If not, adjust or replace the switch.
Replace float assembly: If the float is broken or waterlogged, replace the float and switch assembly.

Medium 3/5

Bucket Full Float Switch

Check Price on Amazon

We may earn a commission from links on this page.