F2
Meaco
Temperature Sensor Fault (Humidifier)
Meaco humidifier displays F2 and stops operating
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open or shorted temperature NTC sensor, Sensor dislodged from air path, Damaged sensor wiring, Faulty main PCB
How to Fix / Troubleshooting
Safety: Unplug the unit before inspection.
Steps:
- Power reset: Unplug for 10 minutes and restart. If F2 persists, proceed.
- Locate temperature sensor: Usually a small NTC probe near the air outlet or intake.
- Inspect sensor: Ensure the probe is intact and positioned correctly in the airflow. Reposition if it has fallen away.
- Check wiring: Follow the sensor leads to the PCB and verify the connector is secure and wires are not damaged.
- Test and replace: Measure resistance of the NTC at room temperature and compare to Meaco specs. Replace with a new temperature NTC sensor if readings are abnormal.
- PCB fault: If a good sensor still results in F2, the main control PCB may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Temperature NTC Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements