Dehumidifier shows P2 and stops; water bucket is full or appears full to the unit.

Safety: Unplug the dehumidifier before removing the bucket.

• Empty bucket: Remove and empty the water bucket. Clean it with mild detergent if dirty.
• Check float: Inspect the float inside the bucket (if present). Ensure it moves freely and is not stuck in the "full" position.
• Bucket switch: Locate the bucket full switch in the unit. Press it manually to confirm it moves and clicks. If it is stuck, clean around it.
• Continuous drain: If using a hose, ensure it is not kinked or blocked and that it slopes downward to a drain.
• Replace switch/float: If P2 remains with an empty, correctly seated bucket, replace the bucket full switch or float assembly.