Dehumidifier displays P2 and stops; water tank is full or nearly full.

Steps:

• Empty the tank: Turn off and unplug the unit. Remove the water tank, empty it, and rinse with clean water.
• Clean float area: If the tank has an internal float, clean any slime or mineral deposits that may cause it to stick in the "full" position.
• Reinstall tank properly: Slide the tank back in firmly until it clicks or sits flush. Many Olimpia Splendid models will show P2 if the tank is slightly misaligned.
• Check for leaks: Ensure the tank is not cracked and that any drain plugs are properly seated.
• Float switch check: If P2 remains with an empty, correctly seated tank, inspect and test the float switch assembly as described for E5.