Dehumidifier shows P2 and stops, usually when tank is full

Safety: Turn off and unplug before removing the tank.

Steps:

• Empty the tank: Remove the water tank, empty it completely, rinse, and reinstall.
• Check tank position: Ensure the tank slides fully into place and engages the internal switch lever.
• Inspect actuator: Look for a broken plastic tab or magnet on the tank that triggers the full-tank switch or sensor. Replace the tank if the actuator is damaged.
• Locate tank switch: Behind the tank opening, find the micro-switch or reed sensor. Press it gently with a tool to see if the P2 code clears when the unit is powered (use caution and avoid live contacts).
• Replace switch: If the switch does not click mechanically or tests faulty with a multimeter, replace it with the correct Orbegozo tank full switch.