Pro Breeze
Fan Not Running
Dehumidifier display and buttons work, but fan does not run at all.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed fan motor, Obstructed fan blades, Loose fan motor connector, Faulty main control board fan driver
How to Fix / Troubleshooting
Safety: Unplug the unit before accessing the fan.
Steps to fix non-running fan:
- Check for obstructions: Look through the grille for foreign objects blocking the fan. Remove any debris.
- Access fan motor: Remove the rear or side panel to expose the fan motor assembly and wiring.
- Inspect wiring: Ensure the fan motor connector is fully seated on the PCB and wires are intact.
- Spin test: Manually spin the fan blade. If it is stiff or seized, replace the fan motor assembly.
- Voltage test (advanced): With appropriate caution and the unit powered, a technician can measure voltage at the fan motor connector when the fan should be running. If voltage is present but the motor does not run, replace the motor. If no voltage, the main control PCB is likely faulty.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fan Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements