Dehumidifier displays P2 and stops collecting water.

Safety: Always unplug the unit before reaching inside the bucket compartment.

Steps to resolve P2:

• Empty and reseat the tank: Remove the water tank, empty it completely, and reinstall it firmly, ensuring it is fully inserted and level.
• Check float mechanism: Inside the tank or tank compartment, locate the float that triggers the bucket full switch. Make sure it moves freely and is not stuck by dirt or scale.
• Inspect bucket full switch: With the tank removed and the unit unplugged, locate the bucket full float switch (often a small microswitch or magnetic reed switch). Check that the actuator moves when the float is raised and lowered.
• Test the switch (if you have a meter): Disconnect the switch and check continuity while actuating it. Replace if it does not change state.
• Continuous drain users: If using a hose, ensure it is not kinked or blocked and that it slopes downward to a drain. A backed-up hose can cause the tank to fill and trigger P2.
• Replace faulty parts: If the float is damaged or the switch fails testing, replace with a compatible Pro Breeze bucket full float and switch assembly.