Russell Hobbs Fan Motor Failure or Control Fault

Dehumidifier display and buttons work but fan does not run

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed fan motor, Seized fan bearings, Faulty fan capacitor (if external), Defective fan driver circuit on main PCB

How to Fix / Troubleshooting

Safety: Unplug before accessing the fan and internal wiring.

Steps:

  • Check for obstructions: Ensure nothing is blocking the fan blades.
  • Spin test: Try spinning the fan by hand. If stiff, replace the fan motor assembly.
  • Capacitor (if fitted): Some motors use an external run capacitor. Inspect for bulging or leakage and replace with the same µF rating if faulty.
  • Voltage test: With appropriate safety precautions, a technician can measure voltage at the fan motor terminals when the unit is on. If voltage is present but the motor does not run, replace the motor. If no voltage, suspect the main control PCB.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Fan Motor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements