Dehumidifier leaks water onto the floor instead of into the bucket or drain hose.

Safety: Unplug the unit and mop up any spilled water to prevent slipping.

Steps:

• Inspect bucket: Remove the bucket and check for cracks or overfilling. Ensure it seats fully when reinstalled.
• Internal drain: Locate the drain hole from the evaporator tray into the bucket or pump. Clear any slime or debris with a pipe cleaner.
• Hose connections: If using continuous drain, ensure the hose is firmly attached and sealed at the adapter. Use Teflon tape if needed.
• Leveling: Make sure the dehumidifier is on a level surface so water flows correctly into the drain.
• Pump tray: On pump models, open the pump compartment and clean out any buildup that could cause overflow.

Replace a cracked water bucket or damaged drain adapter if leaks persist.