F6 displayed, unit may not respond to button presses or may behave erratically.

Safety First: Unplug the ice maker before removing the control panel.

• Remove control panel: Carefully pry off the front control panel or remove mounting screws to access the keypad and interface board.
• Inspect for moisture: Look for condensation, water streaks, or corrosion on the board and connectors. Dry gently with a soft cloth and allow to air dry.
• Check ribbon cable: Reseat the keypad ribbon cable at both the keypad and main control board ends. Ensure it is not torn or kinked.
• Test buttons: After drying and reseating, restore power and test each button. If some or all buttons still do not respond, the keypad or interface board is likely defective.
• Replace keypad/interface: Install a new OEM Amana user interface or keypad assembly, transfer any overlays, and reassemble the panel.