Avanti
No Cooling / Refrigeration System Failure
Avanti ice maker fills with water but does not freeze; water stays liquid and drains away.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed compressor, defective start relay or capacitor, refrigerant leak, condenser fan not running, extremely dirty condenser coil
How to Fix / Troubleshooting
Safety: Unplug the unit before accessing the compressor compartment.
Steps:
- 1. Listen for compressor: When the unit is on, check if the compressor is running (a low humming sound) and if the condenser fan is spinning.
- 2. Clean condenser coil: Remove the rear panel and clean the coil thoroughly to improve heat transfer.
- 3. Check fan motor: If the fan is not running, test and replace the condenser fan motor.
- 4. Inspect start components: Remove and test the compressor start relay and capacitor. Replace if defective.
- 5. Professional service: If the compressor runs but the evaporator never gets cold, or if the compressor is hot and cycles off, a sealed-system issue (leak or internal failure) is likely and requires a licensed technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Compressor Start Relay
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements