How to Fix / Troubleshooting

Safety first: Disconnect power before working near moving parts.

Access fan assembly: Remove the internal rear or side panel to expose the Balay evaporator fan.
Check for ice obstruction: Look for ice or frost blocking the fan. If present, allow the unit to defrost fully (leave unplugged with doors open and towels to catch water) before further testing.
Inspect fan blades: Ensure the fan blade is not cracked or rubbing against the shroud. Replace the blade if damaged.
Test fan motor: Spin the fan by hand; it should rotate freely. With a multimeter, check the motor windings for continuity. If open or if the motor hums but will not start, replace the fan motor assembly.
Control output: If the motor is good but never receives voltage when the unit calls for cooling, the main control PCB fan output may be defective and require replacement.

E06 displayed; ice maker fan does not run or runs very slowly; poor cooling and low ice output.

Possible Causes