Balay Short Cycling

Ice maker frequently starts and stops (short cycling) with very brief run times.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty thermostat or temperature sensor, Over-sensitive overload protector, Control board error, Poor ventilation causing rapid overheating

Safety first: Unplug the unit before testing components.

Ventilation: Ensure adequate clearance and clean condenser coils to prevent overheating.
Check sensors: Test cabinet and evaporator NTC sensors for correct resistance; replace if readings are erratic.
Overload protector: Inspect the compressor overload; if it trips at normal temperatures, replace it.
Control board: If hardware is good, the control PCB may be mismanaging cycles and require replacement.

Hard 4/5

Cabinet NTC Sensor

Check Price on Amazon

We may earn a commission from links on this page.