Beko
Temperature Sensing / Calibration Fault
Beko ice maker shows display but temperature reading seems incorrect
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Drifted or faulty thermistor, Poor thermistor contact with evaporator, Wiring resistance due to corrosion, Control board miscalibration
How to Fix / Troubleshooting
Safety first: Unplug the unit before accessing sensors.
- 1. Verify with external thermometer:
- Place a thermometer in the ice compartment and compare to the displayed temperature.
- 2. Inspect thermistor placement:
- Ensure the sensor is firmly clipped to the evaporator or in the correct location.
- 3. Check wiring:
- Inspect the thermistor harness for damage or corrosion at connectors.
- 4. Replace thermistor:
- If readings are consistently off, install a new Beko thermistor.
- 5. Control board:
- If a new sensor does not correct the reading, the main PCB may require replacement or reprogramming by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Thermistor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements