Clatronic
Display module or connection fault
Display works but shows garbled characters or segments missing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose display ribbon cable, Cracked display PCB, Moisture damage to display, Faulty main control PCB display driver
How to Fix / Troubleshooting
Safety first: Unplug the ice maker before removing the control panel.
- Reseat ribbon cable: Remove the control panel cover and carefully unplug and replug the ribbon cable between the display and main PCB.
- Dry moisture: If condensation is present, gently dry the area and allow several hours before retesting.
- Inspect for cracks: Examine the display PCB for physical cracks or broken solder joints. Replace the display module if damaged.
- PCB replacement: If a known‑good display still shows garbled output, the main PCB display driver is likely faulty and the PCB should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements