Clatronic
Overheating electrical component
Unit emits a burning smell during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dust buildup on condenser causing overheating, Failing fan motor, Overloaded compressor, Burnt relay or wiring on PCB
How to Fix / Troubleshooting
Safety first: Immediately unplug the unit if you smell burning. Do not continue to operate until inspected.
- Inspect rear compartment: Remove the rear cover and look for discolored or melted wires, connectors, or PCB components.
- Clean condenser and fan: Remove dust buildup that can cause overheating.
- Check fan and compressor: Ensure the fan spins freely and the compressor is not excessively hot. Replace any component showing signs of overheating.
- Professional service: If you find burnt PCB areas or wiring, have the main control PCB and harness replaced by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements