Danby ice maker leaks water onto the counter or floor.

Safety first: Unplug the unit and mop up any spilled water to prevent slipping. Turn off water supply for plumbed‑in models.

Steps to locate and fix leaks:

• Check reservoir: Remove the water reservoir and inspect for cracks or splits, especially at seams and corners. Replace if damaged.
• Inspect hoses: Open the rear or side panel and look for loose clamps or wet spots on hoses leading to the pump and evaporator. Tighten clamps and replace brittle or cracked hoses.
• Examine inlet valve (built‑in): Look for drips from the valve body or fittings. Reseat or replace compression fittings and replace the valve if it is leaking from the body.
• Verify fill level: Do not fill the reservoir above the maximum line. Overfilling can cause overflow during operation.
• Test after repair: Refill with water, run a cycle, and observe for any new leaks before reassembling panels.