Danby
User Interface / Low Voltage Instability
Display or indicator lights on the Danby ice maker flicker or behave erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose display harness connection, Failing control board voltage regulator, Intermittent power cord connection, Moisture on control panel
How to Fix / Troubleshooting
Safety first: Unplug the unit before accessing the control panel.
Steps to stabilize display operation:
- Check power source: Plug the unit directly into a wall outlet (no extension cord) and avoid sharing the circuit with heavy appliances.
- Inspect UI connections: Remove the top or front panel to access the display or keypad board. Reseat the ribbon cable or harness connectors.
- Dry moisture: If condensation or spills have reached the control panel, dry the area thoroughly before reassembly.
- Replace control board if needed: If flickering persists, the main control PCB or display board may be failing and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board or Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements