E11 displayed, ice maker does not start ice cycle, beeps repeatedly at startup

Safety first: Disconnect power before removing any trim or panels around the door.

Door switch checks:

• Locate door switch: The door switch is usually mounted in the frame of the ice compartment and actuated by the door.
• Test operation: Press the switch plunger by hand. You should hear a distinct click. If not, the switch may be stuck or broken.
• Electrical test: Remove the switch from the housing, disconnect the wires, and test continuity with a multimeter. The reading should change when the switch is pressed.
• Inspect door alignment: Ensure the door closes fully and presses the switch. Adjust hinges or door alignment if needed.
• Check wiring: Examine the switch harness for damage and reseat the connector at the control board.

Fix: Replace the door switch if it fails mechanical or electrical tests. This is typically a straightforward repair.