Ice harvest timeout; ice does not release from evaporator plate within expected time.

Safety: Unplug the unit before removing covers. Hot gas lines can be very hot; avoid contact.

• Inspect evaporator plate: Remove the front panel and observe the evaporator grid or plate. Heavy scale or mineral buildup can prevent ice from releasing. Descale using a Fagor‑approved ice machine cleaner following the product instructions.
• Check harvest valve coil: Locate the hot gas/harvest solenoid valve in the refrigeration circuit. With power off, test the coil resistance. An open coil indicates a failed valve that must be replaced by a technician.
• Verify thermistor placement: Ensure the evaporator thermistor or temperature probe is firmly attached to the correct location on the evaporator surface and has not fallen off.
• Run a cleaning cycle: Many Fagor ice makers have a dedicated cleaning mode. Run a full cleaning and rinse cycle to remove scale from internal surfaces.

If harvest timeouts continue after descaling and sensor checks, a refrigeration technician should evaluate the hot gas circuit and control board.