Fagor
Electrical Short or Overcurrent on Start
Unit trips the circuit breaker or blows fuses when starting.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted compressor windings, Failed start relay or capacitor, Shorted heater element, Damaged power cord
How to Fix / Troubleshooting
Safety: Do not repeatedly reset a tripping breaker. Unplug the unit before inspection.
- Inspect power cord: Look for cuts, burns, or crushed sections. Replace if damaged.
- Check compressor start components: Test the start relay and capacitor for shorts or damage and replace as needed.
- Measure compressor resistance: With the relay removed, test between compressor terminals and to ground. A short to ground indicates a failed compressor requiring professional replacement.
- Disconnect suspect loads: If qualified, disconnect heater or pump circuits one at a time to isolate the shorted component.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Compressor Start Relay
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements