E6 displayed, ice maker stops and the display may indicate a door or drawer issue.

Safety first: Disconnect power before removing door switch assemblies.

• Step 1 – Check door closure: Ensure the freezer or ice compartment door closes fully and evenly. Adjust leveling feet if the cabinet is twisted.
• Step 2 – Test switch operation: Locate the door switch (usually near the top of the opening). Press it by hand; the interior light should turn off. If not, the switch may be faulty.
• Step 3 – Electrical test: With power off, remove the switch and test for continuity while pressing and releasing the actuator. Replace if readings are not as specified.
• Step 4 – Inspect wiring: Check the harness behind the switch for loose connections or damage.

Install a new Fisher & Paykel door switch if defective. After replacement, restore power and confirm the E6 code clears and the ice maker resumes operation.