Fisher & Paykel
Insufficient Cooling at Ice Maker
Ice maker fills with water but does not freeze the water into ice.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Freezer temperature too high, failed evaporator fan, refrigerant leak or low charge, ice compartment damper stuck closed
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing fans or dampers.
- Step 1 – Check freezer temperature: Use a thermometer to verify actual temperature. Adjust settings if above -15°C / 5°F.
- Step 2 – Listen for fan: With the door switch held closed, listen for the evaporator fan running. Replace the fan motor if silent and power is present.
- Step 3 – Inspect damper: On models with a dedicated ice compartment damper, ensure it opens to allow cold air flow.
If the freezer cannot reach proper temperature, a sealed system issue is likely and requires a licensed refrigeration technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements