Frigidaire ice maker runs but makes very small or thin ice cubes/slabs

Safety: Disconnect power and turn off water before servicing.

Correct water level and thickness:

• Check the water reservoir during a fill cycle; it should reach the normal level indicated in the manual. If low, inspect the inlet valve and supply line for restrictions.
• Clean the ice thickness sensor/probe with a soft cloth and ice machine cleaner to remove scale.
• On models with an adjustable ice thickness screw or control, follow the tech sheet to slightly increase thickness (usually a small clockwise turn).
• Run several cycles and recheck ice thickness. Do not over-adjust, as this can cause over-thick ice and harvest problems.