Galanz Water Fill Failure

Water does not fill the ice-making tray; unit runs but stays dry.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Empty or improperly seated water reservoir, Clogged water inlet screen, Failed water inlet valve, Faulty water level or flow sensor

Safety first: Unplug the unit and shut off water supply if plumbed.

Steps to restore water fill:

Check reservoir: Ensure the water tank is full and properly seated.
Clean inlet: Remove and clean the water inlet valve screen of debris.
Inspect hoses: Verify that internal water lines are not kinked or disconnected.
Test valve: With a multimeter, check the inlet valve coil for continuity. Replace the valve if open or if it does not open when powered.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.