GE Profile
No Water Fill
Ice maker will not fill with water, but other functions seem normal.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Closed or blocked water supply valve, Failed water inlet valve coil, Clogged inlet screen, Faulty water level sensor not calling for fill
How to Fix / Troubleshooting
Safety first: Turn off power and water before disconnecting any water lines.
- Step 1 – Confirm supply: Verify the shutoff valve is open and water flows when the line is disconnected at the ice maker.
- Step 2 – Clean inlet screen: Remove the inlet line from the valve and clean the small screen inside the valve body.
- Step 3 – Test valve coil: Measure resistance across the valve terminals. Replace the valve if the coil is open or out of spec.
- Step 4 – Check water level sensor: Ensure the float or electronic sensor is not stuck in the full position. Clean and test as needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Inlet Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements