F1
GE
User Interface Keypad or Touch Control Fault
GE ice maker with digital display shows F1 and will not start a cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck keypad button, Moisture intrusion into control panel, Damaged touch membrane, Loose ribbon cable between UI and main board
How to Fix / Troubleshooting
Safety first: Unplug the ice maker before removing the control panel or display assembly.
- Inspect control panel: Check for signs of moisture, cracks, or physical damage on the keypad or touch surface.
- Dry the panel: If condensation or spills are present, gently dry the area with a soft cloth. Allow the unit to air dry for several hours with power disconnected.
- Check ribbon cable: Remove the control panel and inspect the flat ribbon cable connecting it to the main board. Reseat both ends firmly.
- Test buttons: With power restored, press each button individually. If one button does not respond or triggers other functions, the keypad is likely defective.
- Replace UI assembly: Install a new GE user interface or display panel if the keypad is faulty. Transfer any mounting hardware and gaskets from the old panel.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements