F6
GE
Drain Pump or Gravity Drain Fault
GE ice maker shows F6 and may not drain water from the reservoir or bin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed drain pump motor (on pump models), Clogged drain hose, Kinked or improperly routed drain line, Blocked internal drain port
How to Fix / Troubleshooting
Safety first: Disconnect power before working on the drain system. Water spills are likely; protect floors.
- Check external drain line: Inspect the drain hose from the ice maker to the household drain. Straighten kinks and ensure the hose slopes downward continuously.
- Clear clogs: Detach the hose at the unit and at the drain. Flush with warm water to remove scale or debris.
- Inspect internal drain: Inside the bin or reservoir, locate the drain opening. Clear any ice, food particles, or mineral buildup.
- Test drain pump (if equipped): Restore power and run a drain cycle. If the pump does not run or makes loud noises without moving water, replace the GE drain pump assembly.
- Verify air gap: Ensure the drain line is not submerged in standing water at the household drain, which can cause backflow and slow draining.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements