Ice maker shows E17; unit may not start a cycle and may indicate a door or cover open condition.

Safety first: Unplug the ice maker before removing any covers.

• Check door closure: Ensure the ice maker lid or door closes fully and the hinges are not bent.
• Locate door switch: Identify the mechanical or magnetic switch near the door frame. Inspect for physical damage.
• Test switch continuity: Disconnect the switch and use a multimeter to check continuity while opening and closing the door. Replace if the switch does not change state.
• Adjust magnet alignment: For magnetic reed switches, ensure the door magnet lines up directly with the switch location. Adjust the magnet position if necessary.
• Repair wiring: Fix any broken or loose wires between the switch and main PCB.
• Replace switch: Install a new Gorenje door/lid switch if faulty, then restore power and verify that E17 is cleared.