Gorenje
Excessive Operational Noise
Ice maker is very noisy during operation, with rattling, buzzing, or grinding sounds.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose compressor mounting, Vibrating panels or tubing, Worn fan motor bearings, Debris in circulation or drain pump
How to Fix / Troubleshooting
Safety first: Unplug the unit before tightening or adjusting any components.
- Level the appliance: Use a spirit level and adjust the feet so the ice maker sits firmly on the floor without rocking.
- Check panels and tubing: Tighten any loose screws on side and rear panels. Gently bend refrigerant tubes away from vibrating surfaces.
- Inspect fans: Spin the condenser and evaporator fans by hand. Replace any fan motor that feels rough or makes grinding noises.
- Check pumps: Listen near the water and drain pumps. If noise coincides with pump operation, inspect for debris in the impeller and clean or replace the pump.
- Compressor mounts: Ensure rubber grommets under the compressor are intact and not hardened or missing.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements