How to Fix / Troubleshooting

Safety first: Turn off the water supply and unplug the unit before disconnecting any hoses.

Steps to check:

Verify water supply: Confirm the tap feeding the ice maker is fully open. Check that the flexible hose is not kinked or crushed behind the unit.
Test water pressure: Disconnect the hose from the back of the ice maker and briefly open the tap into a bucket. A strong, steady flow is required. If weak, correct the plumbing issue.
Clean inlet filter: At the water inlet valve on the back of the Grundig unit, remove the hose and inspect the small mesh filter. Rinse away debris under running water and reinstall.
Check valve operation: Reconnect the hose, restore power, and start a cycle. Listen for a click and water flow when the valve should open. If there is power to the valve but no water passes, replace the water inlet valve assembly.

Note: Use only compatible Grundig or OEM-spec water inlet valves to ensure correct flow and pressure.

Ice maker stops mid-cycle and displays water-related error, no water entering the machine

Possible Causes