Haier ice maker shows E8 and water does not drain from the ice-making compartment.

Safety first: Unplug the unit before working with water or the drain pump. Mop up any standing water to prevent slips.

Steps to troubleshoot:

• Inspect external drain line: Check the drain hose from the ice maker to the household drain. Straighten kinks and ensure the hose is not elevated above the unit’s specified height.
• Check for clogs: Disconnect the hose at the unit and blow through it or flush with water to confirm it is clear.
• Access drain sump and pump: Remove the lower front panel or interior base cover to reach the drain area. Look for debris, scale, or ice blocking the sump or pump inlet. Clean thoroughly.
• Test pump operation: With the unit briefly powered (use caution), listen for the pump running during a drain cycle. If silent or just humming, unplug and test the pump motor for continuity. Replace if open or seized.
• Reassemble and test: Reconnect hoses securely, restore power, and run a cycle to verify proper draining and that E8 clears.

When to call a technician: If the pump receives power but does not run, or if the control board never energizes the pump, professional service is advised.