hOmeLabs
Overfill / Water Level Control in Tray
Ice tray overfills and water spills into the bin
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty water pump timing on control board, Blocked tray overflow path, Mispositioned water distribution tube, Control board logic fault
How to Fix / Troubleshooting
Safety: Unplug before accessing the tray and water distribution system.
Steps:
- Inspect water distributor: Check the water spout or distribution tube above the tray to ensure it is correctly aimed and not partially blocked.
- Clean overflow channels: Remove any scale or debris from overflow paths around the tray.
- Observe fill cycle: With panels off, briefly run a cycle and watch the fill. If the pump runs too long, the control board may be mis-timing the fill.
Persistent overfilling usually indicates a control board or pump control issue; replacement of the main control board may be required.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements